one Software ,its very good dialer which supports many softswitch for calls like voipswitch , asterisk ,PBX, MERA Switch , Nextone, VOS etc. Support Sip and H323 both Protocols. Below is Some other details about X-lite .
Combining voice calls, video calls and Instant Messaging in a simple interface, CounterPath’s X-Lite helps you seamlessly transition from a traditional phone environment into the world of Voice over IP.
The latest release of X-Lite provides a completely redesigned interface that allows for a contact-centric or dialpad-centric user experience, or a combination of the two. It also provides you withsome of the most popular features of our fully loaded Bria and eyeBeam softphones so you can take them for a test drive before you make your purchase.
After downloading and installing eyeBeam, follow the directions below to configure eyeBeam for Callcentric. The configuration is the same for eyeBeam on Windows and Mac OS X.
|STEP 1||Open the eyeBeam application.|
|STEP 2||If you have had eyeBeam installed for a while please skip to 2B below.|
|STEP 2A||If you have just installed eyeBeam you will see a screen appear like the one below:|
If you see this window skip to STEP 3, if not, see 2B below.
|STEP 2B||If you have had eyeBeam installed for a while please RIGHT-CLICK in the main window and select SIP Account Settings… from the drop-down menu.|
|STEP 3||Click the Add… button in the SIP Accounts window.|
|STEP 4||You will now see a window with tabs across the top, and fields to be filled. Follow the directions below for how to fill the fields within each tab.|
|STEP 5||Within the Account tab fill in the fields as explained below:
In addition the Register with domain and receive incoming calls option should be CHECKED; and the target domain radio button selected.
The dialing plan should be left as its default which is:#1\a\a.T;match=1;prestrip=2;
Below is an example:
Once setup as above, click the Apply button (if you made any changes), and then click the OK button.
|STEP 6||You will now be back at the SIP accounts screen. Click the Close button as shown in the picture below:|
|STEP 9||The eyeBeam software will now attempt to register (login) to our servers. You should see this happen in a few seconds and if successful you will see a screen like this:|